Rule 600GPH automatic electric bilge pump / boat submersible 12v bilge pump

    Rule 600GPH automatic electric bilge pump / boat submersible 12v bilge pump

MORE FEATURES

• All-in-one pump & switch - No float switch required
• Pump turns on when water level rises & shuts off when water is removed
• Water cooled motors for long life, with anti airlock design and moisture tight seals.
• Output: Up to 12.5 gallons/minute(750 gallons/hour). Max. recommended discharge head 2.5m.
• Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
• Includes comprehensive user manual with installation instructions and wiring diagram
• Snap-off strainer for easy cleaning
• Connections: For 19mm (3/4") bore hose for 600GPH &750GPH,  29mm hore hose for 1100GPH
• Totally submersible and ignition protected.
• Compact pump for smaller vessels.
• Tough plastic body.
• Limited one year warranty
• Can be used with switch panel for manual override
• Includes comprehensive user manual with installation instructions and wiring diagram

APPLICATION

• Typically used in boat hulls / bilges
• Bait tanks
• Ponds, pools, spas
• Other applications where you have to remove water from
• Note: These pumps are designed for intermittent use only, NOT designed for continuous use
• Note: Bilge and aerator pumps must be lower than the source of water for priming

How a Bilge Pump Works

Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions.

  Backed STARFLO's 1-Year Warranty! 

  DIMENSION DRAWING OF BILGE PUMP

       1. What is your MOQ?

100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.

 2. What about the delivery time?

It depends on your order quantity; it usually takes 7-12 days upon receipt of your 30% deposit by T/T. 

Sample can be delivered within 7days.

 3. Can I buy different types in one container?

Yes, you can mix different types in one container.

 4. Do you have oversea agents?

Of course. We have many agents overseas, if you are interestd in it ,Welcome oversea agents!

 5.Do you accept OEM/ODM ?

Yes. We are also the OEM supplier of many famous companies, such as WALMAT. 

 6. What is your terms of payment.

T/T, 30% in advance, balance against B/L copy.

 7. What is your warranty?

1 year, and within 24 hours reply will be provided to solve customers’ problems.

 8. What is your port of loading?

Xiamen Port,Fuzhou Port,Ningbo Port,Shanghai port.